ECU SHOP - Cables & Adapters, ECUs & Modification Services Available for Sale

Cables

·       MEMS 2J / MEMS 3 Diagnostic, Programming & Remapping Cable - £12

FT232 or CH340 cable, suitable for use with MEMS 1.9 / MEMS 2J and MEMS3 ECUs.

For use with the MEMS Mapper and MEMS Flasher applications as described here: https://andrewrevill.co.uk/MEMSToolsIndex.htm.

NB: This cable CANNOT be used with the Lucas 5AS immobiliser. If you want to work with both MEMS ECUs and the Lucas 5AS immobiliser, you need two separate cables.

 

·       Lucas 5AS Diagnostic & Programming Cable & Adapter - £15

CH340 cable modified with inverted RXD, suitable for use with Lucas 5AS immobilisers.

Comes complete with the required pin-swap adapter.

For use with the Lucas 5/10AS Tools application as described here: https://andrewrevill.co.uk/MEMS3LucasImmobiliserSupported.htm.

NB: This cable CANNOT be used with MEMS ECUs. If you want to work with both MEMS ECUs and the Lucas 5AS immobiliser, you need two separate cables.

 

·       OBDII Splitter / Adapter – 2 Ports – MEMS ECU & Lucas 5AS - £7

2-Way OBD splitter cable.

Centre port is straight-through and may be used to connect to a MEMS 1.9 / MEMS 2J and MEMS3 ECU.

End port is a pin-swap adapter and may be used to connect to a Lucas 5AS immobiliser.

Modified MEMS ECUs

·       Caterham SuperSport MEMS 1.9 ECU MKC104022 (Clone)
Recreated using Original Caterham SuperSport Mapping – £150

Caterham SuperSport MEMS 1.9 ECU, part number MKC104022. This is a Rover MKC104022 which has had the microcontroller replaced with a new chip programmed with Caterham SuperSport firmware and map KFACV000/KFACV001 as described here:
https://andrewrevill.co.uk/RecreatingtheCaterhamSuperSportEU2ECU.htm

Original SuperSport ECUs are almost impossible to find now. The SuperSport engine will not run correctly with a standard Rover ECU.

Sealed and finished with a smart new laser-cut rigid alloy lid.

 

·       MGF VVC / Lotus Elise VVC / Caterham VVC MEMS 2J ECU MKC104001
Ready Modified & Fully Remappable Over OBDII (Supports Dual Map etc.) – £150

This is a Rover MEMS 2J ECU, part number MKC104001. Suitable for MGF VVC / Lotus Elise VVC / Caterham VVC. It has been modified with an AT29C1024 socketed EEPROM and modified as required to allow it to be reprogrammed using MEMS Mapper EU2.

Using MEMS Mapper EU2 it will support dual map with live switching, immobiliser delete, general remapping, flywheel trigger patterns swaps, injector swaps etc. as described here: https://andrewrevill.co.uk/MEMSMapperEU2.htm.

Sealed and finished with a smart new laser-cut rigid alloy lid.

Can be supplied with original stock map or options and configuration of your choice.

eBay will not let me list this as it apparently violates their Emissions Control Defeat Devices policy. If you are interested, please contact me directly on andrew.d.revill@googlemail.com. I can sell to you directly with payment by PayPal or bank transfer. I apologise this frustrating situation.

 

·       Rover 800 / 825 / 827 KV6 MEMS 2J ECU MKC103991
Ready Modified & Fully Remappable Over OBDII (Supports Dual Map etc.) – £150

Rover MEMS 2J ECU, part number MKC103991. Suitable for Rover 800 / 825 / 827 KV6. It has been modified with an AT29C1024 socketed EEPROM and modified as required to allow it to be reprogrammed using MEMS Mapper EU2.

Using MEMS Mapper EU2 it will support dual map with live switching, immobiliser delete, general remapping, flywheel trigger patterns swaps, injector swaps etc. as described here: https://andrewrevill.co.uk/MEMSMapperEU2.htm.

Sealed and finished with a smart new laser-cut rigid alloy lid.

Can be supplied with original stock map or options and configuration of your choice.

eBay will not let me list this as it apparently violates their Emissions Control Defeat Devices policy. If you are interested, please contact me directly on andrew.d.revill@googlemail.com. I can sell to you directly with payment by PayPal or bank transfer. I apologise this frustrating situation.

ECU Modification Services

·       Rover MEMS 2J Modification Service
Any MEMS 2J Without CAN – Modify Your ECU to Fully Remappable Over OBDII (Supports Dual Map etc.) – £75

Your own Rover MEMS 2J (of any part number which does not use CAN – as far as I’m aware, none of them do) modified with an AT29C1024 socketed EEPROM and modified as required to allow it to be reprogrammed using MEMS Mapper EU2.

This service is suitable for MGF VVC / Lotus Elise VVC / Caterham VVC / Mini MPI / Rover 620 / Rover 820 etc. ECUs.

Using MEMS Mapper EU2 it will support dual map with live switching, immobiliser delete, general remapping, flywheel trigger patterns swaps, injector swaps etc. as described here: https://andrewrevill.co.uk/MEMSMapperEU2.htm.

Sealed and finished with a smart new laser-cut rigid alloy lid.

Can be supplied with original stock map or options and configuration of your choice.

eBay will not let me list this as it apparently violates their Emissions Control Defeat Devices policy. If you are interested, please contact me directly on andrew.d.revill@googlemail.com. I can sell to you directly with payment by PayPal or bank transfer. I apologise this frustrating situation.